Product Data; Technical Data - Wilo Drain MTS 40 Instrucciones De Instalación Y Funcionamiento

English
3 Transport and interim storage
Inspect the pump/system for transport damage
immediately upon arrival. Any transport damage
found must be reported to the carrier within the
prescribed periods.
CAUTION! Risk of damage to the pump!
Risk of damage due to improper handling during
transport or storage.
• The pump may only be hung from or carried
using the handle provided for transport. Never
suspend or carry using the cable!
• The pump should be protected against moisture,
frost and physical damage during transport and
interim storage.
4 Applications
WARNING! Health hazard!
The materials are not designed for drinking
water supply.
The pump must not be used for pumping drink-
ing water.
The submersible motor-driven pump is suitable
for transporting sewage from shafts and tanks. It
is used primarily for pressure drainage of sewage
water for domestic purposes (according to EN
12056 in compliance with the country-specific
prefaces and regulations).
5.2

Technical data

Mains voltage
Frequency
Protection
Insulation class
Speed
Power input P1 (EM/DM)
Motor power rating P2 (EM/DM)
Nominal current
Winding protection contact (break contact)
Max. contact load
Permissible medium temp. Min / max
Max. flow rate
Max. delivery head
Max. immersion depth
Operating mode S3 (optimum), motor
immersed
Operating mode S1 (optional), motor
immersed
Explosion protection
Oil-filled seal chamber
Oil quantity
10

5 Product data

5.1 Type code
Example: MTS 40/27-1-230-50-2
MT
S
40
/27
-1-230
-50
-2
1~230 V, ±10 % (EM = single-phase motor)
3~400 V, ±10 % (DM = three-phase motor)
50 Hz
IP 68
F
Max. 2900 1/min
see rating plate
see rating plate
see rating plate
U =250 V AC, I = 1 A
max max
U = 30 V DC, I =30 mA DC
max max
+3°C to 40°C
see rating plate
see rating plate
10 m
Intermittent service S3,
25% (2.5 min. mode, 7.5 min. break).
MTS 40/... S1: 200 hrs/year
EEx d IIB T4
Marcol 82 (medical white oil)
MTS 40/... 150 ml
CAUTION! Risk of damage to the pump!
The pump is not suitable for use with flow media
containing solids such as sand, stones or metals.
MT = Series MT (Macerator Technology)
S = Stainless Steel Motor
Nominal width discharge side [mm]
Maximum delivery head [m] where Q=0
single-phase motor 1~230 V
Mains frequency 50 Hz
2 poles
WILO SE 03/2009