Orima ORC 29 W Manual De Instrucciones página 31

5. Turn bracket 4 around 180° together with the washers on the axle and the plastic spacer,
transferring the washers to the
attached to the freezer compartment door, fix it in place on the other side of the refrigerator.
6. Turn the bracket 6 around 180° together with the washers on the axle and the plastic spacer.
Remove the axle and the washers and reattach them on the other side of the bracket. Once the
bracket 6 is attached to the refrigerator compartment door, fix it in place on the other side of the
refrigerator in the uppermost apertures. Use the covers c to cover the bracket and the remaining
space.
7. Remove the bolt covers a and the stoppers b. Remove the screws that hold the handle in place.
Move the handle to the other side and screw them in place. Place the stoppers into the
remaining apertures in the door, and put the screw caps in place.
8. Remove the cover 10 from the bottom cover 1 and insert it to the guides on the other side of
the bottom cover (symmetrically to former position). Insert left and right legs of the bottom
cover 1 (see pic.) and push it until cover fixing.
OPERATION PROBLEMS AND THEIR SOLUTIONS (TROUBLESHOOTING)
What if ...
 The appliance is plugged in to the mains but it does not work. Check that your house
electricity supply installations are in order. Check that the plug is correctly inserted into the
electricity supply socket.
 The noise has become louder. Check that the appliance is standing stable, on a level place.
To make it level, regulate the front feet. Check if the appliance is not touching any furniture,
and that no part of the refrigeration system at the back part of the appliance body is touching
the wall. Pull the appliance away from any furniture or walls. Check that the cause of
increased noise isn't due to bottles, cans or dishes in the appliance that might be touching each
other.
 Water has appeared at the bottom of the refrigerator compartment. Check whether a
thaw water channel space isn't blocked. Clean the thaw water channel space with a cleaner
intended for that purpose.
 Water has appeared under the appliance. The thaw water collection tray has slipped off
the compressor. Place the tray on top of the compressor.
 When the appliance door is opened, the rubber sealing gasket pulls out. The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it with
warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing
gasket back into the place.
 High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance door is shutting tightly, whether the door wasn't kept open longer than
necessary when taking out or putting in foodstuffs, or whether a large amount of warm food
was placed in the appliance.
 The top of the appliance has condensation on it. The ambient relative air humidity is above 70
%. Ventilate the room where the appliance stands, and if possible remove the cause of the
humidity.
axle on the other side of the bracket. Once the bracket is
30