Routine Maintenance; Filter Cleaning And Replacement - Kruger KB650-850GT-ET Manual De Uso Y Mantenimiento

This sweeper does not require servicing.
Dry clean only.
Do not wash the machine with water or solvents.
To avoid damaging lateral brush bristles, lift the brush from the ground after
every usage of the sweeper. In this way, during rest intervals, bristles are not
constantly under pressure and do not loose efficiency in cleaning when used.

FILTER CLEANING AND REPLACEMENT

The filter requires a periodical and complete cleaning operation.
To remove the filter, take away firstly the waste container.
−
Unhook the lock clamp (1).
−
Rotate the clamp in the unlock position (2).
−
Remove the panel filter (3).
Clean the filter (2) by means of pressed air (do not exceed a pressure level of
6 bar) onto the side with the protection net. If the pressed air cleaning result
insufficiently, it's possible clean the filter with water.
N.B.: if operate a water cleaning do not use detergent
If the filter result damaged, or difficult to clean sufficiently, just replace it.
Ask your dealer for the original spare part you need.
After cleaning, reinstall the filter (2); rotate the clamp in lock position end hock
the clamp.
N.B.: if operate a water washing, must completely dry the filter before
reinstall.

ROUTINE MAINTENANCE

2
3
1
47
KB 650/850 GT-ET