Hoover SILENT ENERGY Manual De Instrucciones página 3

IMPORTANT SAfeTy ReMINdeRS
This cleaner should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance. Use only
attachments recommended or supplied by Hoover.
Warning: electricity can be extremely dangerous. This appliance is double insulated and
must not be earthed. This plug is fitted with a 13 amp fuse (UK only).
important: The wires in the mains power lead are coloured in accordance with the
following code:
Blue – neutral
Brown – Live
StatiC ELECtriCitY: Some carpets can cause a small build up of static electricity. Any
static discharge is not hazardous to health.
aFtEr USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SaFEtY With ChiLdrEn, ELdErLY or thE inFirm: Do not let children play with
the appliance or its controls. Please supervise the use of the appliance by older children,
the elderly or the infirm."
hooVEr SErViCE: To ensure the continued safe and efficient operation of this appli-
ance we recommend that any servicing or repairs are only carried out by an authorised
Hoover service engineer.
imporTAnT ThAT yoU Do noT:
• position the cleaner above you when cleaning the stairs.
• Use your cleaner out of doors or on any wet surface or for wet pick up.
• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other
similar items.
• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours
as this may cause risk of fire / explosion.
• run over the supply cord when using your cleaner or remove the plug by pulling
on the supply cord.
• Stand on or wrap the power cord around arms or legs when using the cleaner.
• Use the appliance to clean people or animals.
• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged
stop using the cleaner IMMedIATeLy. To avoid a safety hazard, an authorised
Hoover service engineer must replace the supply cord.
0565 5338 Silent Energy im_15 lang.indd 1
ASSeMbLINg yOUR CLeANeR
• Connect hose to cleaner main body, as shown in
• Connect tube upper end to handle, as shown on
• Connect floor nozzle to lower tube end, as shown in
USINg yOUR CLeANeR
1. power Supply - Extract cord fully and plug it into a power supply
2. navigator Smart Control - For outstanding ease of use, grip the handle as shown
To adjust the length of the telescopic tube hold the nozzle in place with your foot, pull
the telezoom trigger and raise or lower the handle to the most comfortable cleaning
position. [5].
3. Carpet & floor Nozzle. Press the pedal on the nozzle
mode for the floor type.
hard Floor: The brushes are lowered to protect the floor
Carpet: With lifted brushes for the deepest clean
4. Turn the cleaner on by pressing the On/Off button on the Navigator Smart Control
handle [7].
5. Adjust the power setting. The cleaner is equipped with 3 cleaning programs ideals to
achieve better performances in every use conditions; select the cleaning programme
on the Navigator Smart Control handle [8] to suit the surface to be cleaned. The
cleaner is setted on Silent energy programme optimized for everyday cleaning
turbo power - for stubborn dust or harsh surfaces.
Silent Energy - high dust pick up ideal for every day cleaning.
Soft - ideal for delicate surfaces like curtains or beds
6. Switch off at the end of use by reversing the action to switch on. Unplug then gently
pull the power cord out of the cleaner [4] and the cord will then begin to automatically
retract back into the cleaner.
7. parking and Storage - The tube can be parked for temporary storage while in use
or in the storage position when not in use [10].
1
gB
[1]
[2]
[3]
[4].
[5].
[6] to select the ideal cleaning
[9],
13/03/2009 09:34:31