Use: Jar / Mixing Vessel; Use: Blender Attachment - CASO DESIGN B300 VacuServe Manual Del Usuario

14.3 Use: Jar / mixing vessel

► Safety switch: The device will operate only works if it is correctly assembled. Frozen
fruits and ice should be processed only with a lot of liquid or the device could be
damaged.
► The appliance is not suitable for the processing of pastry.
► The appliance is equipped with overheating protection. If the appliance has been
operated for too long or has been operated when overfilled, the appliance switches itself
off. Pull the mains plug and allow the appliance to cool down for at least half an hour.
You can then operate the appliance as usual.
► Pull the mains plug following use.
► Clean the accessories directly following use. To this end turn the blade base
anticlockwise and remove it from the jug /blender bottle /blender attachment.

14.4 Use: Blender attachment

Fill blender attachment with food and place it with a mounted 2 blade attachment on the
motor block. See assembly.
Turn the knob to level 1 or 2 until the desired
consistency is achieved.
Function P (Pulse).
1. Turn the knob to Position P until the desired
consistency is achieved. The appliance runs
for as long as you keep the knob in Position
P.
Remove the blended foods.
Please note
► Do not let the device run idle and do not
over fill it. The motor could be damaged.
► Do not operate the device longer than 60
seconds and then pause for 60 seconds.
42