Samsung LE20S8 Manual Del Usario página 22

Setting the PC
Coarse
Fine
Move Enter

adjust Enter
Image lock
Position
Image reset
auto adjustment
Move Enter
Image lock
Position
Image reset
auto adjustment
Move Enter
Coarse and Fine tuning of the Image (Image lock):
Image lock
the purpose of picture quality adjustment is to remove or reduce
0
0
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune
again. after the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
return
. Preset: Press the SourCE button to select PC mode.
. Press the MEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr
3. Press the ▲ or ▼ button to select "PC", then press the
EntEr
. Press the EntEr
. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the
EntEr
. Press the ◄ or ► button to adjust the screen quality.
Press the EntEr
. Press the ExIt button to exit.
Position
Changing the Image Position (Position):
adjust the PC's screen positioning if it does not fit the tV screen.
. Follow the "Coarse and Fine Tuning of the Image (Image Lock)"
instructions number 1 to 3.
. Press the ▲ or ▼ button to select "Position", then press the
return
EntEr
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the EntEr
. Press the ExIt button to exit.
PC Initializing the Image Settings (Image reset):

You can replace all image settings with the factory default values.


. Follow the "Coarse and Fine Tuning of the Image (Image Lock)"

instructions number 1 to 3.
. Press the ▲ or ▼ button to select "Image Reset", then press the
return
EntEr
3. Press the ExIt button to exit.
PC
adjusting the PC Screen automatically (auto adjustment):

auto adjustment allows the PC screen of set to self-adjust to the


incoming PC video signal. the values of fine, coarse and position

are adjusted automatically.
. Follow the "Coarse and Fine Tuning of the Image (Image Lock)"
return
instructions number 1 to 3.
. Press the ▲ or ▼ button to select "Auto Adjustment", then press the
EntEr
3. Press the ExIt button to exit.
English - 0
button.
button.
button to select "Image Lock".
button.
button.
button.
button.
button.
button.