Fora D40 Serie Manual Del Propietário página 31

NOTE:
• If you press
• If the pulse rate symbol is shown as
heart beat period deviated from the mean heart beat by greater than 25%.
during measurement, the meter will be turned off.
2. The heart symbol
a pulse is detected during the inflation.
3. After the measurement, the meter
displays the systolic pressure, diastolic
pressure and pulse rate.
4. Press to switch off. Or it will switch
off automatically if left idle for 3 minutes.
instead of
● Measurement Average Mode
Always apply the pressure cuff before
turning on the meter.
1. Press and hold
FORA D40d), or just press
D40c and D40g). The meter will turn on
and enter the averaging mode. Press
to select the desired user number and
then press . Then the cuff will begin to
inflate automatically (for FORA D40c and
FORA D40d).
will flash when
, it means the
for 3 seconds (for
(for FORA
31