Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Custom overlay panels allow you to blend the exterior of your
refrigerator into the overall kitchen décor and to use custom
handles for additional design flexibility.
The custom panels must have backer panels attached in order to
mount them to the refrigerator. It is most common to work with
three panels, as shown in the following graphic: a decorative
overlay panel, a ¹/₈" (3.18 mm) spacer panel or spacer strips and a
¹/₄" (6.35 mm) backer panel.
Overlay Panel
Spacer Panel
Backer Panel
5
/
" to
3
/
"
8
4
1
/
"
4
(15.88 to
(6.35 mm)
1
/
"
8
19.05 mm)
(3.18 mm)
Custom Overlay Panels
7
1
/
"
TOP GRILLE PANEL
4
(18.4 cm)
Maximum Weight: 10 lbs (4.5 kg)
20"
(50.8 cm)
REFRIGERATOR
51
1
/
"
4
DOOR PANEL
(130.2 cm)
Maximum Weight:
35 lbs (15.9 kg)
20
1
/
"
FREEZER DOOR PANEL
4
(51.4 cm)
Maximum Weight: 30 lbs (13.6 kg)
Spacer Panels
NOTE: Spacer panels must be at least 1" (2.54 cm) from the top, bottom, and side edges of the backer panel.
10
Overlay Series Custom Panels
Spacer Panel
1
/
"
8
(3.18 mm)
1" minimum
(2.54 cm)
Door/Grille Trim
Offset Dimension
Custom Overlay Panel Dimensions
40
3
/
"
8
(102.6 cm)
20"
(50.8 cm)
REFRIGERATOR
51
1
/
DOOR PANEL
(130.2 cm)
Maximum Weight:
35 lbs (15.9 kg)
40
3
/
"
8
(102.6 cm)
In some cases, your cabinet manufacturer may choose to work
with one panel routed for the different dimensions. Follow these
panel dimension and placement instructions to be sure that the
custom overlay panels will fit properly.
IMPORTANT:
The weight of the refrigerator door overlay panel cannot
exceed 35 lbs (15.9 kg).
The weight of the freezer drawer overlay panel cannot exceed
30 lbs (13.5 kg).
The weight of the top grille overlay panel cannot exceed
10 lbs (4.5 kg).
To minimize panel weight, you may use 2" (5.08 cm) spacer strips
around the perimeter in place of full-sheet solid spacer panels.
The spacer strips must be set in at least 1" (2.54 cm) from the top,
bottom and side edges of the backer panel. If you use spacer
strips, it is also recommended that you use two 2" (5.08 cm) strips
horizontally centered for added support.
"
4
Side
Offset
3
/
"
16
(4.7 mm)
Custom Backer Panels
39
/
"
5
8
(100.6 cm)
Side Offset
/
" (9.5 mm)
3
8
19
5
/
"
19
5
/
"
8
8
(49.85 cm)
(49.85 cm)
49
3
/
"
49
3
/
"
16
16
(124.93 cm)
(124.93 cm)
Bottom
Bottom
Offset
Offset
1
/
"
2
(1.27 cm)
(1.27 cm)
40"
(101.6 cm)
19
7
/
"
8
(50.48 cm)
Offset all sides
3
/
" (4.7 mm)
16
6
1
/
"
4
(15.9 cm)
Bottom Offset
1
/
" (1.27 cm)
2
Exterior
Panel
extends
above
door.
Side
Offset
3
/
"
16
(4.7 mm)
1
/
"
2
Center
Backer
Panel
left to
right
Tabla de contenido
