Circutor MI-5500e Manual De Uso página 30

9. When key Cx10 or Cx100 is used, reading shall be carried out in
range C and shall be multiplied by 10 or 100, in addition to the factor
corresponding to the test voltage.
10. When you press Stop  key, the instrument will start discharging the
potentials accumulated in the apparatus, internal capacitances and in
the element under test as well. When this discharging process is over
(up to 60 seconds after turn Off) the high-voltage  led will turn off
automatically. The test leads may be disconnected. To finish
measurement press On/Off  switch.
31