Parkside IAN 352107 2007 Instrucciones De Utilización Y De Segurida página 27

Electrical safety
Power tool plugs must match the
a)
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock .
Avoid body contact with earthed or
b)
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded .
Do not expose power tools to rain or
c)
wet conditions. Water entering a power
tool will increase the risk of electric shock .
Do not abuse the cord. Never use
d)
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock .
When operating a power tool
e)
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock .
If operating a power tool in a
f)
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD reduces
the risk of electric shock .
Personal safety
Stay alert, watch what you are
a)
doing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or under the
influence of drugs, alcohol or medication . A
moment of inattention while operating power
tools may result in serious personal injury .
Use personal protective equipment.
b)
Always wear eye protection. Protective
equipment such as dust mask, non‑skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries .
Prevent unintentional starting.
c)
Ensure the switch is in the off‑position
before connecting to power source
and/or battery pack, picking up or
carrying the tool. Carrying power tools
with your finger on the switch or energising
power tools that have the switch on invites
accidents .
Remove any adjusting key or wrench
d)
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
injury .
Do not overreach. Keep proper
e)
footing and balance at all times. This
enables better control of the power tool in
unexpected situations .
GB/IE 25