Bernina Q 20 Instrucciones De Montaje página 22

English
33
When the machine is positioned correctly the top extension leafs will close
around the needle plate.
35
The front base mounting bracket will need to be secured from underneath
thetable.
37
Insert the base mounting bracket bolts (J) through the top base frame
surface (on both the left and right sides) and through the base mounting
bracket. Secure by positioning the washer and nut.
22
34
L L
K K
Insert the machine mounting bolts (L) into the base mounting brackets (K).
36
J J
Insert the machine mounting bolt (L) into the internal machine base moun-
ting bracket. Secure, but do not tighten fully until after the base mounting
bracket (K) has been positioned with the base mounting bracket bolts (J).
38
Secure the front base mounting bracket (K) by tightening both the base
mounting bracket bolts (J) with the nut driver (Q).