Bernina Q 20 Instrucciones De Montaje página 20

English
27
A
Slide open the top extension surfaces (A) in preparation for positioning
the machine.
29
Remove the Q 20 from packaging.
31
When positioning the machine upright, keep the base level so the internal
machine mounting bolt brackets do not slide out of position.
20
28
A
I
Position the machine base support (I) aligning evenly with the front and back
machine mounting bolt channels.
30
Position the Q 20 on its side and slide the internal machine mounting bolt
brackets from the front edge 6" (15.24 cm) for the front bracket and to 24"
(60.96 cm) for the back bracket.
32
Position the machine onto the machine base support.
The back of the machine should be positioned so that it is fl ush with the
back of the top base frame.