Tools And Materials; Before You Begin - Kohler K-408 Manual Del Usuario

Tools and Materials

Assorted
Screwdrivers
Hacksaw or
Tubing Cutter

Before You Begin

CAUTION: Risk of property damage. When installed in a
two-way configuration, the auxiliary outlet must be capped
off to prevent possible leakage out of the unused auxiliary
outlet, and the grey collar must be changed to the black
two-way stop collar.
CAUTION: Risk of product damage. The transfer valve is
designed for use with Kohler non-diverting bath spouts. Do
not use diverters, diverter spouts, or shut-off devices
downstream of the transfer valve.
CAUTION: Risk of product damage. Do not use
petroleum-based lubricants on the plastic components of this
valve.
CAUTION: Risk of product damage. Excessive heat will
damage the internal plastic components. Follow these steps to
avoid product damage.
IMPORTANT! Do not apply excessive heat while soldering. Direct
the torch flame away from the brass body.
IMPORTANT! Only apply direct heat to the connectors and
extensions.
IMPORTANT! If there is limited access to the solder connections, or
if any other risk of excessive heat being applied to the brass body
exists, remove the cartridge prior to soldering. If you remove the
cartridge, protect the seals and O-rings from becoming dirty,
damaged, or misaligned.
086847-2-AC
Plumbers
Adjustable
Putty
Wrench
Solder
Sealant Tape
2
Propane
Torch
Kohler Co.