Warranty And Liability; Product Description; Description Of The Pictured; Components (Figures A - D) - ABNOX AXDV-N1 Manual De Instrucciones

en

Warranty and liability

Warranty and liability claims for personal injury and
damage to property are excluded when they are due
to one or more of the following causes:
• Improper use of the product.
• Work carried out by other than qualified personnel.
• Improper transportation, storage, assembly,
commissioning, operation and maintenance of the
product.
• Failure to observe the information in the operating
manual regarding safety, transportation, storage, assembly, commissioning, operation, maintenance
and setup of the product.
• Operating the product with defective protective
devices or improperly installed or non-functional
safety and protective devices.
• Structural changes to the product.
• Changing the compression ratios for pressure
protection, and operating at pressures higher than
intended for the product.
• Insufficient monitoring of machine components
that are subject to wear.
• Improper repairs and using third-party components.

Product description

Purpose
The needle metering valve is used for dosing low-
viscosity lubricants.
Labelling
The needle metering valve is labelled according to the
model code (Figure A/No. 6).
Functionality
Due to the compressed air connections, the needle
metering valve can be controlled externally via a 5/2-
way valve (Figure D/No. 10). This initiates dosing in
the hydraulic section, provided the needle metering
valve is connected to an active pump. The desired
dosing volume is continuously adjustable in the range
from 3 mm to 200 mm
3
(Figure A/No. 5). A locking screw (Figure A/No. 4)
is provided to retain the set quantity. The vent with
hose connection (Figure B/No. 7) permits the clean
discharge of the medium.
20
with the adjustment screw
3

Description of the pictured

components (Figures A – D)
1 Medium discharge
2 Connection block
3 Medium intake
4 Locking screw
5 Dosing screw
6 Type key
7 Bleed screw
8 Pneumatics connection
9 Mounting holes
10 5/2-way valve*
*Not included in the scope of delivery