is pulse rate value, the green front on the right bottom is PI value. Press "up
button" or "down button" to page up or page down;press "left button" or "right
button" to move the recording time which is denoted by pink triangle.
Close the device
a In the main menu interface, move the choice bar to the "Power" item, then
press menu button to close the device. If the record function has been
opened, the prompt interface of "Recording..." will appear when closing the
device.It means that the device is in the record state, can't be closed.
b In the state of boot-strap, long press power button could close the device too.
6.1.4 PC software operation
Please connect the device to the computer by data line, then double click
"SpO
Assistant" icon to run the PC software. The functions such as
2
uploading real time/memory data and change device ID could be carried out
by the software. Please refer to <SpO
If the users choose to turn on the display function on computer, it
would probably take several seconds for the data to appear on the
computer screen.(If there is no data on the computer screen, un-
plug data line, then repeat step E again .)
6.1.5 Charge
Connect the device to power supply with power line, and make the power
button on.
When the device is closed and the battery is charging up, short press
power button and the device will display dynamic charge icon, it means
that the device is charging up. When the battery status is full, the charg-
ing has been finished. When the device is open and the battery is charg-
ing up, the battery status icon on the right top will display dynamically.
It means that the device is charging up.
When the battery status is full, the charging has been finished.
6.2 Attention for operation
A lease check the device before use, and confirm that it can work normally.
B The finger should be in a proper position (see the attached illustration of
Figure 4 for reference), or else it may result in inaccurate measure.
C The ray between luminescent tube and photoelectric receiving tube must
get across subject's arteriole.
D The device should not be used at a location or limb tied with arterial canal
or blood pressure cuff or receiving intravenous injection.
Assistant user manual> for detail.
2
18