Operating Guide; Application Method - Gima OXY-200 Guía De Uso

11

6. OPERATING GUIDE

6.1 Application method

6.1.1
Inserting the lemo probe into the lemo jack of the device (The probe is limited to
the one that is provided by our company; and can't be replaced with the similar
one by other manufacturers), then put the finger into the probe as Figure 4.
A Long press power button until the device is turned on.If use alternating cur-
rent, make sure that the power supply line is connected accurately and the
alternating current switch is on.
B Do not shake the finger and keep the patient in a stable state during the
process.
C The data can be read directly from the screen in the measure interface.
Fingernails and the luminescent tube should be at the same side.
If the alarm function is on, the device will provide alarm signal when
probe or finger is out.
6.1.2 Alarm pause
A Alarm including the alarm of measure data's going beyond the limits, the
alarm of low-voltage, the alarm of finger out.
B When alarm is on, short press the alarm pause button to make the alarm
pause, it can renew alarm after period of time, alarm pause time can be set
by menu.
C Only alarm sound can be closed, the prompt information displayed can't be
closed.
Figure 4. Probe connecting