AERMEC VMF-E0X Manual De Instrucciones E Instalación página 17

Water probe present
Water side changeover
Pre-heating delay
With valve
Minimum and maximum
controls active
- Dynamic correction A:
Without valve
Water probe (Heating)present
Delay for pre-heating
Minimum temperature check
activated (Heating)
Maximum check activated if
With Valve
probe is present (Cooling)
- Dynamic correction A:
Fixed correction in Cooling, in
absence of Cooling probe
Without valve
DIMENSIONS [mm]
Adjusting a 2-pipe system
Upstream water probe
Water probe not fitted
Air side changeover
Pre-heating delay
No minimum and maximum
control
Fixed correction
Configuration not used
Adjusting a 4-pipe system
Upstream water probe (Heating)
Water probe (Heating) absent
Delay for pre-heating
Minimum temperature check
deactivated (Heating)
Maximum check activated if
probe is present (Cooling)
/
Fixed correction
Configuration not used
143
141
Downstream water probe
Water probe present
Air side changeover
No ventilation delay
Minimum and maximum
controls active
- Dynamic correction B:
Water side changeover
No ventilation delay
Minimum and maximum
controls active
- Dynamic correction B:
Downstream water probe (Heating)
Water probe (Heating)present
No ventilation delay
Minimum temperature check
activated (Heating)
Maximum check activated if
probe is present (Cooling)
Dynamic correction B:
/
Fixed correction in Cooling, in
absence of Cooling probe
No ventilation delay
Minimum temperature check
activated (Heating)
Maximum check activated if
probe is present (Cooling)
Dynamic correction B:
/
Fixed correction in Cooling, in
absence of Cooling probe
68
AVMFE0LJ 1704 - 6795744_00
Water probe not fitted
Air side changeover
Pre-heating delay
No minimum and maximum
control
Fixed correction
Air side changeover
No ventilation delay
No minimum and maximum
control
Fixed correction
Water probe (Heating)absent
Delay for pre-heating
Minimum temperature check
deactivated (Heating)
Maximum check activated if
probe is present (Cooling)
Fixed correction
No ventilation delay
Minimum temperature check
activated (Heating)
Maximum check activated if
probe is present (Cooling)
Fixed correction
17