Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Congratulations on your purchase of this Aermec "VMF-E0X" ELECTRONIC THERMOSTAT BOARD KIT.
Made with top quality materials in strict compliance with safety regulations, "VMF-E0X" will provide you with
outstanding performance for a long time to come.
CONTENTS
Important information • Package
Description of the accessory
Summary of the control logics • Dimensions
Network settings • Installation
Electronic board connections
Dip-switch settings
Technical caracteristics • Connections specifications • Compliance with EC Mark
Connections (examples)
Wiring diagrams
WARNING: The VMF boards are
designed to be applied to fan coils
installed in indoor environments.
WARNING: Keep separate electri-
cal connections from water con-
nections. Water connections and
drain should be on the side oppo-
site of the electrical connections.
WARNING: the fan coil is connected
to the power supply and water cir-
cuit. Operations performed by per-
sons without the required technical
skills can lead to personal injury to
the operator or damage to the unit
and surrounding objects.
WARNING Components sensi-
tive to static electricity may be
destroyed by voltages notably lower
than those at the human perception
threshold. These voltages form
when you touch a component or
electric contact of a unit, without
first discharging accumulated static
electricity from your body. The
damage caused to the unit by an
overvoltage is not immediately evi-
dent - it only appears after a certain
period of operation.
PACKAGE
The thermostats are shipped in
standard cardboard box packaging.
S TAT I C
E L E C T R I C I T Y
ACCUMULATION
Any person not connected in a con-
ductive manner with the electronic
potential of his surrounding environ-
ment can accumulate electrostatic
charges.
STANDARD PROTECTION
AGAINST ELECTROSTATIC
CHARGES
Earthing quality
When working with units sensitive to
electrostatic electricity, ensure that
people, workplaces and unit casings
are correctly earthed. This will pre-
vent the formation of electrostatic
charges.
Avoid direct contact
Only touch the element exposed to
electrostatic risk when absolutely
essential (e.g. for maintenance).
Touch the element without coming
into contact with either the con-
tact pins or the wire guides. If you
follow this rule, the energy of the
electrostatic charges cannot reach
or damage the sensitive parts.
Before taking measurements on the
unit, it is necessary to discharge
all electrostatic charges from your
body: to do this, just touch an
earthed metal object. Only use
earthed measuring instruments.
POWER WITH A SINGLE-PHASE
VOLTAGE OF 230V ONLY
Any other type of power supply could
permanently damage the thermostat
and fan coil.
MALFUNCTIONING
In case of malfunction, cut off power
to the unit, then energise it again
and restart the device. If the prob-
lem occurs again, call the local
After-Sales Service immediately.
DO NOT TUG THE ELECTRIC CABLE
It is highly dangerous to pull, crush
or tread on the electric cables, or to
fix them with nails or drawing pins.
A damaged power cable can cause
short circuits and injure people.
AVMFE0LJ 1704 - 6795744_00
13
14
17
18
19
20
21
53
55
13
Tabla de contenido
