Tabla de contenido
4. With the stem facing down, place the
assembly over the center hub. It should fi t
snugly and rest on the bottom of the
work bowl.
5. Place work bowl cover onto work bowl,
with the handle area just to the left of
center. Turn counterclockwise to lock
onto work bowl.
6. Align pusher with the feed tube opening
on the work bowl cover and slide the
activating rod down to the bottom.
7. Use the cord wrap on the housing base
underside to add or remove cord.
8. You are now ready to operate the machine.
MACHINE FUNCTIONS
PULSE
1. With the machine properly assembled
and engaged, and ingredients in the work
bowl, press the PULSE button repeatedly
as needed.
ON (Continuous)
1. Properly assemble and engage
the machine.
2. To add ingredients through the feed tube,
remove the pusher and fi ll the feed tube as
directed (see Preparing Food for Slicing or
Shredding, page 12).
3. Engage the pusher and press the ON
button. The button light will turn on and
the motor will start.
4. Press the pusher fi rmly down until all
ingredients have passed into the work
bowl. Remove the pusher and refi ll
ingredients as needed.
When you engage the pusher again, the unit
will automatically turn on.
5. Press the OFF button when fi nished.
OPERATING
INSTRUCTIONS
Try chopping some practice foods, such
as a zucchini or carrot, before you process
food to eat. First, cut the ingredients into
1-inch pieces.
• Place the work bowl over the center
stem, with the handle area just to the left
of center. Turn counterclockwise to lock
in place.
• Insert the metal chopping blade and put
ingredient pieces in the work bowl. Put
on the cover and turn counterclockwise
to lock onto work bowl. Align the pusher
and the pusher's activating rod with the
corresponding openings on the feed tube,
and push all the way down.
• Press and release the PULSE button two
or three times. Each time the blade stops,
let the pieces drop to the bottom of the
bowl before you pulse again. This puts
them in the path of the blade each time
the motor starts.
• Using the pulse/chopping technique,
you get an even chop without
overprocessing. Check the texture
frequently by looking through the cover.
If you want a fi ner chop, press and
release the PULSE button until you
achieve the desired texture.
Onions and other food with a high water
content will quickly end up as a purée,
unless examined through the work bowl
after each pulse to make sure they are
not overprocessed.
Try chopping other food like meat for
hamburger or sausage. Then make
mayonnaise, pastry or bread, as described
in the following sections.
To obtain consistent results:
Be sure all the pieces you add to the bowl
are about the same size.
Be sure the amount you process is no larger
than recommended on the inside cover of
this booklet.
Before you do anything, wait for the blade
to stop spinning. Once it does, turn the
cover clockwise to unlock, and remove by
lifting it off.
Remove the bowl from the base of the
machine before removing the blade.
This creates a seal to prevent food from
leaking. Turn the bowl clockwise to unlock
from the base, and lift straight up to remove.
8
Capítulos
Tabla de contenido
