Black+Decker CM3005S Manual De Uso Y Cuidado página 8

BREWING 1 TO 4 CUPS
Note: This feature slows down the brewing to extract the best flavor when
brewing a small amount of coffee.
1. Add the appropriate amount of water for the number of cups to be
brewed (from 1 – 4)
2. Fill the permanent filter or paper filter with desired amount of coffee grounds.
3. Press the BREW button down so that the button is in the 1-4 CUP position.
Note: When using this feature coffee will be brewed at regular strength only.
4. Press the ON/OFF button, its light illuminates and the brewing cycle begins.
Note: Press the ON/OFF button to cancel this function.
SNEAK-A-CUP™ FEATURE (TO BE USED ONLY FOR COFFEE)
Remove the carafe and brewing is paused. The carafe must be placed back on
the carafe plate in 20 seconds to prevent overflow. Brewing begins again.
Important: The Sneak-A-Cup™ feature should not be used when making tea
to allow for proper steeping time.
KEEPING COFFEE and TEA HOT - AUTO OFF FUNCTION
Once coffee has brewed, the coffeemaker will keep the "Keep Hot" carafe
plate hot between 1 and 2 hours then it shuts off automatically. During that
time the time since brewing is visible at the bottom of the display.
There are 2 preset AUTO OFF times you can select:
• Press the AUTO OFF button to select 2 hours (2).
• Press the AUTO OFF button a second time to select 1 hour (1).
BREW STRONG
1. If stronger coffee is desired, press the STRONG button before pressing
the ON/OFF button. Its light illuminates and function is activated.
2. If using delayed brewing, follow steps 1 through 5 under DELAYED
BREWING, press the STRONG button and then press the AUTO button.
To cancel, press the STRONG button again and the light turns off.
8