6.5 Power Cord/Power Connection
• Verify the Power Control knob is set to the OFF position
before proceeding.
• Plug the detachable AC cord into the back of the Medically
Approved Power Supply.
• Plug the power supply outlet into the back of the Cavitron
Select™ Reservoir Pump.
• Plug the 3 prong grounded plug into an approved outlet.
Section 6: Installation Instructions for Cavitron
Cavitron
6.6 Foot Control Cable Assembly Connection
Align the Foot Control plug with the receptacle on the back
of the Cavitron
firmly seated.
®
6.7 Lavage Control Detachable Handpiece
Select™ SPS™ Reservoir System cont'd.
Select™ SPS™ Reservoir System cont'd.
®
®
®
®
Select™ Reservoir Pump and push it in until
Cable Assembly Connection
• Plug the Handpiece outlet into the receptacle on the back of
the Cavitron
Select™ Reservoir Pump.
®
• Holding the Handpiece Cable Assembly seat male connector
into appropriate female connector.
• Once seated, snap male connector into female connector by
pushing on the end of the male connector.
• Rotate Lavage Control on the handpiece to middle setting.
Turn on the on/off switch (power adjustment). This
energizes the system and the ultrasonic unit is ready for
operation.
Select Scaler with
Select Scaler with
®
®
®
ENGLISH • 7