Technical Specifications - ClearSounds A300 Manual De Uso

Teléfono inalámbrico con amplificación de sonido dect 6.0
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3. Make sure programming is done in the correct dialing mode
(touch-tone or pulse).
Caller ID information does not show
1. Make sure you are subscribed to Caller ID service through
your local phone company.
2. Let the phone ring a couple of times as there may be a delay
in receiving the Caller ID information.
No Caller ID information while on a call
1. Make sure you service provides Caller ID information while
you are on a call. This is sometimes known as "Caller ID on
Call Waiting" or "Type II Caller ID".
2. The phone cannot display the information if another phone
on the same line is in use.
Answering Machine Tips
1. If you can't hear the messages adjust the volume (page 8,29).
2. If the system always plays Announce2, the message memory
may be full. Erase some messages.
3. If the incoming messages are incomplete, the message
memory is full. Erase some messages.

TECHNICAL SPECIFICATIONS

General Number:
Amplification:
Power Requirements
AC power Adapter:
Base Input: 7.5V, 300mA
Handset Input: Ni-MH 1.2V x 3, 800mAh
Charging Time: 15 hours
Weight (lb): Base: .32 Handset: .28
Dimensions (in.) Base: 5.1x3.9x2.7 Handset: 6.6x2.3x1.5
Jack: 2.5mm headset
Features and Specifications subject to change without notice.
A300
Up to 25 dB incoming
58 – ENGLISH
Tabla de contenido
loading

Tabla de contenido