Phone Handset Settings; Handset Name - ClearSounds A300 Manual De Uso

4. Enter the PIN (the default PIN is 0000) and then press
the Reset soft key. If the PIN is validated, the base
settings will be reset to the initial factory settings,
otherwise the settings will remain.
5. After resetting, the handset will return to standby
mode.

PHONE HANDSET SETTINGS

Reminder: Press the Back soft key from any menu to
return to the previous screen. To return to the main screen,
press . Otherwise, after 40 seconds, the phone will
automatically return to the main screen from any menu if no
key is pressed.

Handset Name

█
This feature allows you to give each registered handset a name
in order to easily recognize each handset if you have more than
one registered to the base. To set the handset name:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key.
4. Enter the handset name (up to 12 characters) by
using the keypad (see page 50 for the character map
and instructions) and then press the Save soft key to
confirm and exit. The handset name will be displayed
above your handset number in standby mode.
NOTE: If you make a mistake while entering the name, use the
Erase soft key to correct it. Each time you press this key, the
last character is deleted.
or down
or down to scroll to HS Name and then
26 – ENGLISH
to scroll to HS Settings and