Hearing Aid Compatibility; The Phone Book - ClearSounds Talk500 V508 Manual Del Usario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

put a call on hold and take a second incoming call on the same

line by pressing CALL WAITING button. press CALL WAITING again to

alternate between the two calls.

Note: If you do not have any special phone services requiring a

switch-hook signal, pressing CALL WAITING might disconnect the

current calls.

If you have Voice Mail Service from your local phone company, when

you are unable to answer a call, the incoming call will be forwarded

to a mailbox where the caller can leave a message. Your Talk500 will

display MESSAGE WAITING if a recorded message has been left. The

New Call LED will blink until the message is retrieved.

or you can press the DELETE button once, the display shows DELETE

?, press and hold the DELETE button to turn oFF the New Call LED

and the MESSAGE WAITING message.

Note: Subscription is required to use the Message Waiting services.

This unit is compatible with inductively coupled hearing aids and

cochlear processors. Adjust your hearing aid's or processor's "T-switch"

to the "T" position. Make sure to hold the handset close to your hearing

aid or processor.

Important: When using the phone book features, please note it is only

available at phone book mode (

press

button once.

Storing numbers in the phone book

1. press and release the MENU button until SToRE NUMBER is

shown.

2. press the DIAL button. The cursor will flash in the first position.

3. Enter the required telephone number with a maximum of 22

digits using the number pad and confirm with DIAL button.

4. Enter the required name with a maximum of 16 letters. The next

section will tell you how to enter names.

5. Confirm with DIAL button. The display now shows NAME

RECoRDING.

Message Waiting Indicator