English - Kenwood AX970 Manual De Instrucciones

before using your Kenwood
attachment
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Switch off the appliance before fitting
and removing this attachment.
●
Keep your fingers away from moving
parts and the openings on the
attachment.
●
Ensure the attachment is secured in
position before switching on the
mixer.
●
Never leave the appliance
unattended when it is operating.
●
Never use a damaged attachment
and/or appliance.
●
Always ensure loose articles and
clothing are secured before using
this attachment.
●
To avoid electric shocks, never let
the power unit, cord or plug get wet.
●
Never let the cord hang down where
a child could grab it.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with the
appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.

English

key
adjustable knob
pasta feed roller
flat pasta attachment
to assemble
1 Remove the outlet cover by pressing
its top then lifting off
2 With the pasta maker in the position
shown locate in the outlet, then
rotate into position
to use your pasta maker
1 Make your pasta dough. Follow one
of the dough recipes supplied.
2 Set the adjustable knob on the side
of the pasta attachment to number 1
by pulling the knob out and turning.
3 Flatten a piece of dough and sprinkle
some flour between the rollers.
4 Turn the kitchen machine to speed
1 (you will see the rollers turning).
5 Pass the piece of dough through the
rollers repeating until you get a
smooth surface. (Folding the dough
in half across its width or length
between rollings will help to achieve
this).
6 Adjust the knob progressively from 1
to 9, each time re-feeding the dough
through the attachment to achieve
the desired thickness
thickness using settings 5 to 7 is
recommended.
7 Cut the rolled pasta into
desired/manageable pieces.
Use as required.
2
.
.
. Pasta