2.4. Dimensions and connections
The overall dimensions and electrical connections of the ecoSMART e-system are
described below.
2
1
Illustration 2.2. Overall dimensions and electrical connections (amounts in mm).
No.
1
2
3
2.5. Assembly and disassembly of the covers
A 4 mm Allen wrench is needed to assemble and disassemble the covers.
1. Disassemble the top cover. Remove the screws located at the rear and pull
the cover upwards.
2. Disassemble the front cover. Remove the screws located at the upper part
and pull the cover upwards.
3. Disassemble the side covers. Remove the fastening screws and remove the
cover.
3x
507
45
4x
90
70
3
Description
Power wiring (PV, Grid, EPS)
230Vac 50/60Hz power supply
Control and communication signals
Table 2.1. Connections key.
51
Installer manual ecoSMART e-system
720