The small wave symbol on the front panel earth clamp connector indicates that the preferred connection is for "short arc"
welding and aluminium. The connection on the connector with a large wave symbol is used preferably for "spray arc". The
inductance (IND) limits the short circuit current and ensures welding with a minimum amount of spatter.
A digital measuring KIT can be optionally installed on the front panel, displaying the welding voltage and current.
WARNING!. This machine cannot be adjusted at a distance. If you have acquired the MIG-44 WIRE FEEDER, this has a
potentiometer for regulating the voltage. In this unit the potentiometer is not operative.
Max welding current:
Current regulation:
No load voltage
Insulation class
Open circuit voltage
Control voltage
Welding wire
Adjustment settings
Power input
Power factor cos. Phy
Supply voltage
Max current at primary
Slow fuses for 380 V
Dimensions (mm):
Weight :
SELECT 400/600. TECHNICAL DATA
SELECT-400
45 % D.C.
400 A
60 % D.C.
350 A
100 % D.C.
270 A
50-400 A
18-41 V
0,8-1,6 mm
16 KVA
26 A
25 A
130 kg
42 V
H
42 V
30
0,85
230/400 V AC – 50 Hz 3 phase with earth
510 width
850 height
850 length
SELECT-600
600 A
550 A
420 A
50-600 A
18-52 V
0.8-2,4 mm
28 KVA
48 A
50 A
150 Kg