Service And Repair Indicators; Touch Sensor Care And Cleaning - 3M C3266PW Guia Del Usuario

Ocultar thumbs Ver también para C3266PW:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 670
4

Service and Repair Indicators

Do not attempt to service this unit yourself with the exception of Filter Replacement.
Unplug the display and refer to an authorized service personnel in the event that:
Filter Replacement Procedure
3M Touch Systems recommends to vacuum or replace the fan filter at least every six
months or if a noticeable rise in surface temperature occurs.

Touch Sensor Care and Cleaning

Periodically clean the glass touch sensor surface. Turn off your display before
cleaning.
Do not install this display in areas where extreme vibrations may be
generated. For example, nearby manufacturing equipment may produce
strong vibrations. The vibrations may cause the display to exhibit picture
discoloration or poor video quality.
The 3M touch controllers mentioned in this document are USB compatible
full speed devices.
3M does not warrant that we are USB compliant pursuant to USB
specifications.
Cooling fan will cycle based on internal temperature. When the internal
temperature grows higher than ambient, the fan will turn on.
System will shut down when internal temperature reached a critical level.
The product is exposed to liquid.
The product does not operate properly when the operating instructions are
followed.
The product exhibits a distinct change in performance, indicating a need for
service.
The power cable or plug is damaged or frayed.
Remove screws from the filter cover
Remove filter cover and filter
Replace filter (Use 3M filter # 98-1100-0230-4)
Re-install cover
3M Touch Systems, Inc. Proprietary Information
TM
3M
Multi-Touch Chassis Display User Guide
loading

Este manual también es adecuado para:

C4267pwC4667pwC5567pwC6587pw