Transport Position; Operating Position - Husqvarna LC 141Li Manual De Instrucciones

Transport position

WARNING! Prevent unintentional start
!
during transport, maintenance or repair
work by turning the safety key to '0',
removing the battery and waiting at least
5 seconds.
The handle assembly can be folded to minimize space
needed for transport and storage.
1 Turn the safety key to '0' and remove the battery.
2 Loosen the 2 knobs on the upper part of the handle
and fold the handle backwards.
CAUTION! The upper part of the handle may only be folded
down backwards. If the handle is folded in the wrong
direction there is a increased risk of damaging the cable.
3 Loosen the lower knobs.
4 Slide the knobs to the ends of the grooves on both
sides of the machine.
5 Fold forward the handle.
84 – English
ASSEMBLING AND ADJUSTMENTS

Operating position

1 Raise handles until lower handle section locks into
place in operating position.
2 Slide the lower knobs up towards the handle until they
stop and a click is heard.
3 Screw on the handle with the knob.
4 Fold up the upper part of the handle and tighten the
knobs on both sides.