Tabla de contenido
Idiomas disponibles
Idiomas disponibles
G
B
Warning!
The
condensation
water
contain residual oil. Dispose of the condensation water in an
environmentally compatible manner at the appropriate collection
point.
7.3 Safety valve (ref. G)
The safety valve has been set for the highest permitted pressure of the
7.4 Checking the oil level
The compressor is life lubricated. In any case, periodically check the
oil level.
Warning!
The possible topping up of oil should be done with extreme caution.
Should it be necessary to top up, at the end of the operation, the oil level
should NOT exceed the mark MAX on the oil dipstick.
Use SAE 40 mineral oil. Never mix different grade oils.
9. TROUBLESHOOTING GUIDE
Note: Remove power source and drain tank pressure prior to making any repairs or adjustments.
FAULT
Leakage of air from the valve of the
The compressor stops and restarts
After a few attempts to restart, the
The compressor does not stop and the
Any other type of operation must be carried out by authorized Service Centers, requesting original parts. Tampering with the machine
may impair its safety and in any case make the warranty null and void.
Warranty and repair.
from
the
pressure
vessel
Check valve that, due to wear or dirt on the
Tripping of the thermal cutout due to
Tripping of the thermal cutout due to
plug with the compressor running, low
Irregular functioning of the compressor or
7.5 Storage
Warning!
Pull the mains plug out of the socket and ventilate the appliance
and all connected pneumatic tools.
will
Switch off the compressor and make sure that it is secured in
such a way that it cannot be started up again by any unauthorized
person.
Warning!
Store the compressor only in a dry location which is not
accessible to unauthorized persons.
Always store upright, never tilted!
8. DISPOSAL AND RECYCLING
The unit and its accessories are made of various types of material,
CAUSE
valve, clean the valve seat and the special
Remove the plug and contact the Service
18
REMEDY
Tabla de contenido
