Olympia CC 415.4 Manual Del Usaurio página 21

Troubleshooting
Device does not work
Device no longer func­
tions after a longer period
out of service or stops
during operation.
(The AUTO button
lights up red).
Material jams
Paper Shredder CC 415.4 / 518.4 / 624.4
Is the power plug con­
nected properly in the
power socket?
Is the material not drawn
in automatically or does
the cutting mechanism
not start up?
The AUTO button
flashes blue.
Has the permissible
operating cycle been
exceed?
Has the maximum ca­
pacity of the infeed been
exceed? The AUTO
button flashes red.
Was the paper drawn
into the infeed straight?
Gi
Appendix
Insert the power plug in
a properly installed pow­
er socket.
Feed the material in so
that the sensor, posi­
tioned in the centre of
the infeed, detects the
material.
Insert the waste bin
properly.
Pay attention to the per­
missible operating cy­
cle (refer to Technical
Data).
Pay attention to the max­
imum capacity of the in­
feed (refer to Technical
Data).
Clear the material jam
(refer to Reverse Run­
ning and Clearing Resid­
ual Material)
Ensure the material is
straight when fed into the
infeed.
Clear the material jam
(refer to Reverse Run­
ning and Clearing Resid­
ual Material)
21