Sunways NT 10000 Manual Del Usuario página 98

Protection Concept
The micro controller continuously and
simultaneously monitors and displays the
following parameters. Numbers 1 to 3
refer to the energy units 1 to 3:
Error No. Description
001 DC overvoltage 1
002 DC overvoltage 2
003 DC overvoltage 3
004 Frequency fault 1
005 Frequency fault 2
Frequency fault 3
006
Overheating of heat sink 1
007
Overheating of heat sink 2
008
Overheating of heat sink 3
009
Grid undervoltage 1-phase 1
010
Grid undervoltage 1-phase 2
011
012 Grid undervoltage 1-phase 3
013 Grid overvoltage 1-phase 1
014 Grid overvoltage 1-phase 2
015 Grid overvoltage 1-phase 3
016 Grid undervoltage 3-phase
017 AFI fault 1
018 AFI fault 2
019 AFI fault 3
020 Insulation fault 1
The numbering 1 to 3 refers respectively
to the performance unit 1 to 3:
Error Description
No.021 Insulation fault 2
022 Insulation fault 3
023 DC injection 1
024 DC injection 2
025 DC injection 3
026 Isolated operation
027 Grid overvoltage 3-phase
028 Surge fault 1
029 Surge fault 2
030 Surge fault 3
031 Grid voltage 10 minutes mean value
> 10 percent U
032 Grid voltage 10 minutes mean value
> 10 percent U
033 Grid voltage 10 minutes mean value
> 10 percent U
034 Control circuit board 1 fault
035 Control circuit board 2 fault
036 Control circuit board 3 fault
038 Back-up battery empty
98
1
nominal
2
nominal
3
nominal