If Problems Occur - Olympia A 4610 Manual Del Usaurio

If Problems Occur

5. The laminating pouch is drawn in
automatically and ejected at the
via the
output
2
CAUTION! Risk of burns
through hot laminating pouch.
When the laminating pouch is
ejected after lamination, it is
extremely hot. Only remove the ejected
lamination pouch holding it at the
cooled end.
6. When all the lamination processes have been completed, press the
4 button to switch the laminator off.
POWER
If Problems Occur
Clearing Pouch Jams
If you inadvertently feed the laminating pouch into the
angle, or if the rollers are soiled with too much residual adhesive, or if
you try to laminate unsuitable materials, laminating pouches can jam
inside the laminator.
1. Press and hold the
direction.
CAUTION! Risk of burns through hot laminating pouch. When
the laminating pouch is ejected after lamination, it is extremely
hot. Only remove the ejected lamination pouch holding it at the
cooled end.
2. Carefully pull the laminating pouch out of the
tor.
3. Only release the
been fully ejected at the
After a pouch jam, always clean the laminator. Clean the laminator as
described in Section Regular Maintenance and Service.
18
pouch guide
1
button. The laminator runs in reverse
REVERSE
6
button when the laminating pouch has
REVERSE
6
infeed
10
G
.
infeed
infeed
.
at an
10
of the lamina-
10