Lamborghini Caloreclima PNZ 30 Manual Del Usario página 24

•
The entire electric system, and in particular all cable sections, must be suitable for the maximum value of absorbed
power indicated on the information plate and in this manual.
•
If the supply cable of the burner is found to be faulty, it must be replaced by qualified personnel only.
•
Never touch the burner with wet parts of the body or without wearing shoes.
•
Do not stretch supply cables and keep them away from heat sources.
•
The cables used must be long enough to allow the burner and, if necessary, the door of the boiler to be opened.
•
All electric connections must be carried out by qualified personnel only, and all regulations in force in terms of electricity
must be scrupulously followed.
•
After removing all the necessary material from its packaging, check the contents and make sure no parts have been
damaged during transport. In case of doubt, do not use the burner and contact your supplier.
•
The packaging material (wooden crate, cardboard, plastic bags, polystyrene, staples etc) is a form of pollution and offers
potential risk if left to itself. Dispose of it according to the rules in force.
DESCRIPTION
Blown air naphtha burners equipped with pre-heaters for optimum combustion, with two ignition phases; completely
automatic and equipped with controls for maximum safety. They can be used in combination with any form of hearth, in
depressure as well as in pressure, within the envisioned operation range.
They can be easily inspected for all their components without the need to be disconnected from the mains.
DIMENSIONS mm
Model A
PNZ 30 430
PNZ 50 600
PNZ 75 640
PNZ 100 640
PNZ 130 660
B C
min.
610 990 150
740 1350 150
740 1350 200
740 1350 200
740 1410 200
E
D ø F
max
315
300 140
390
410 170
390
440 195
390
440 195
390
440 220
- 24
-
ø G H
min. max
155 172 225
180 160 200
210 283
210 283
235 318
FIG. 1
I
M12
M14
M14
M14
M14