Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.9 Request Vehicle Information
Vehicle Information allows to request the vehicle's VIN number, calibration ID(s) which identifies
software version in vehicle control module(s), calibration verification numbers (CVN(s)) and in-use
performance tracking on model year 2000 and newer OBD II compliant vehicles.
CVNs are calculated values required by OBD II regulations. They are reported to check if emission-
related calibrations have been changed. Multiple CVNs may be reported for a control module. It may
take several minutes to do the CVN calculation. In-use performance tracking tracks performance of
key readiness monitors.
NOTE
Available options will vary depending on the vehicle under test.
To request vehicle information:
1. Use the UP/DOWN key to highlight Vehicle Info. from Diagnostic Menu and press the OK key.
Follow on-screen instruction and send the command to read vehicle information.
2. Use the UP/DOWN key to highlight an available option and press the OK key.A screen with
details of the selected option displays.
3. Press the ESC key to exit and return.
4.10 Modules Present
The code reader identifies module IDs and communication protocols for OBD2 modules in the vehicle.
To view module IDs and communication types:
1. Use the UP/DOWN key to highlight Modules Present from Diagnostic Menu and press the OK
key.
2. A screen with the module IDs and protocols displays.
3. Press the ESC key to exit and return.
5. DTC Lookup
DTC Lookup menus allows to request DTC definitions stored in the code reader.
To Look up DTCs:
1. Use the LEFT/RIGHT key to highlight DTC Lookup from Home Screen and press the OK key.
2. Use the LEFT/RIGHT key to select the desired character, then press the UP/DOWN key to
change the digit you want to enter a valid code number. Press the OK key to confirm.
3. A screen with code number and its definition displays. If definition could not be found (SAE or
Manufacturer Specific), the code reader displays "DTC definition not found! Please refer to
vehicle service manual!" If a P1xxx, C1xxx, B1xxx or U1xxx code is entered, select a vehicle
make to look for DTC definitions. Press the BACK key to exit.
6 Review Data
The Playback option leads to screens for review of recorded test results.
To review recorded data:
1. Use the LEFT/RIGHT key to highlight Review Data from home screen and press the OK key.
2. A screen with a list of test records displays. If no data is recorded, the message "No Data
available!" is displayed.
3. Use the UP/DOWN key to highlight an optional record and press the OK key. Details of the test
record displays. View and analysis the recorded information then press ESC to exit.
7 System Setup
This section illustrates how to program the code reader to meet your specific needs.
When Setup application is selected, a menu with available service options displays. Menu options
typically include:
•
Language
•
Configure monitors
•
Unit of measure
•
Key Beep Set
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
12
• Diag Beep Set
• Tool self-test
• Update Mode
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Capítulos
Tabla de contenido
