Accessory Descriptions; Technical Specifications; Getting Started; Connecting To Vehicle - BGS technic 6648 Manual De Instrucciones

2.2 Accessory Descriptions

This section lists the accessories that go with the code reader. If you find any of the following items
missing from your package, contact your local dealer for assistance.
1. User's Guide - provides operation instructions for the usage of the code reader.
2. USB Cable- provides connection between the code reader and a computer to upgrade the tool.

2.3 Technical Specifications

Display: 2.8" TFT color display
Working Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Power Supply: 8-18V vehicle power
Supported Protocols: J1859-PWM, J1850-VPW, ISO9141, KWP2000 (ISO 14230)
Dimensions: 125 x 80 x 24 mm
Weight: 0.5 kg

3 Getting Started

3.1 Connecting to Vehicle

3.2 Providing Power to Code reader

Before using the code reader, make sure to provide power to the code reader.
The unit operates on any of the following sources:
1. 12-volt vehicle power
2. USB connection to personal computer
3.2.1 Connecting to Vehicle Power
The code reader normally powers on whenever it is connected to the data link connector (DLC).
To connect to vehicle power:
1. Turn the ignition off.
2. Locate the data link connector (DLC). The DLC is generally located under the dash on the driver
side of the vehicle.
3. Connect the code reader with the DLC.
4. Switch the ignition key to the ON position.
5. The code reader automatically boots up.

IMPORTANT

Never try to provide power for the code reader from USB connection when the code reader is
communicating with a vehicle.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
and CAN (Control Area Network ISO 11898)
Connect the end of the
diagnostic cable to the DLC
connector in the car.
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
5
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed