Application Overview; Obdii/Eobd-Diagnose - BGS technic 6648 Manual De Instrucciones

3.2.2 Connecting to Personal Computer with USB Cable
The code reader also receives power through the USB port when it is connected to a PC for updating
software and transferring saved files.
To connect to PC:
1. Insert the small end of the USB cable to the USB port at the right side of the code reader and the
large end to a computer.
2. Press the power switch of the code reader to power it on.

3.3 Application Overview

When the code reader boots up, the Home screen opens. This screen shows all applications loaded
on the unit.
Following applications are preloaded into the code reader:
•
OBDII/EOBD – leads to OBDII screens for all 9 generic OBD system tests.
•
DTC Lookup – leads to screens for diagnostic trouble code lookup.
•
Review– leads to screens for access to tested data files.
•
Print Data – leads to screens for access to printing function
•
Battery – leads to battery test and display voltage of vehicle.
•
Setup – leads to screens for adjusting default settings to meet your own preference when using
the code reader.
4 OBDII/EOBD Diagnostics
When Diagnostics application is selected from Home screen, the code reader starts to detect the
communication protocol automatically. Once the connection has been established, a menu that lists
all of the tests available on the identified vehicle displays. Menu options typically include:
•
Read Codes
•
Freeze Frame Data
•
Erase Codes
•
Live Data
•
I/M Readiness
•
O2 Sensor Test
•
On-board Monitor Test
•
Component Test
•
Vehicle Information
•
Modules Present
•
Unit of measure
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
6
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed