Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OBD II (EOBD) Trouble Code Reader
General Notice
For your own safety and the safety of others, and to prevent damage to the equipment and vehicles,
read this manual thoroughly before operating your code reader. The safety messages presented
below and throughout this user's manual are reminders to the operator to exercise extreme care when
using this device. Always refer to and follow safety messages and test procedures provided by vehicle
manufacturer. Read, understand and follow all safety messages and instructions in this manual.
Safety Precautions and Warnings
•
To prevent personal injury or damage to vehicles and/or the scan tool, read this instruction
manual first and observe the following safety precautions at a minimum whenever working on a
vehicle:
•
Always perform automotive testing in a safe environment.
•
Wear safety eye protection that meets ANSI standards. Keep clothing hair, hands, tools, test
equipment, etc. away from all moving or hot engine parts.
•
Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
•
Put blocks in front of the drive wheels and never leave the vehicle unattended while running
tests.
•
Use extreme caution when working around the ignition coil, distributor cap, ignition wires and
spark plugs. These components create hazardous voltages when the engine is running.
•
Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.
•
Keep a fire extinguisher suitable for gasoline / chemical / electrical fires nearby. Ignition is on or
the engine is running.
•
Keep the scan tool dry, clean, free from oil / water or grease. Use a mild detergent on a clean
cloth to clean the outside of the scan tool, when necessary.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
1
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 6648
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Capítulos
Tabla de contenido
