GB
9) Give the end user the instructions for use, the safety recommendations and the CE declaration of conformity.
10) Ensure that the user has understood the correct automatic, manual and emergency operation of the automation system.
11) Inform the user in writing (in the use instructions for example):
b. To disconnect the power supply when cleaning the area that is automated or when performing small maintenance operations (e.g.: repainting).
c. To frequently control that no visible damage has occurred to the automation, and to inform the installer immediately if damage is noticed.
d. Not to allow children to play in the vicinity of the automation.
12) Prepare a maintenance schedule for the automation installation (at least once every 6 months for the safety devices),
DISPOSAL
This product is made up of various components that could contain pollutants. Dispose of properly!
OVERALL DIMENSIONS
The Manufacturer: Telcoma srl
Via L. Manzoni, 11 - 31015 - Z.I. Campidui Conegliano (TV) - ITALY
DECLARES that the products:
are conforming to the only applicable parts of this directive:
- Directive 73/23/EEC, Directive 93/68/EEC Low Voltage
- Directive 89/336/EEC, Directive 92/31/EEC
- Directive 92/31/EEC Electromagnetic Compatibility
The following parts/clauses of the harmonised regulations have been applied:
EN60335-1, EN60204-1, EN 61000-6-3, EN61000-6-1and for the only applicable parts the norms EN12445 e EN12453
DECLARATION BY THE MANUFACTURER (Directive 98/37/EEC, Attachment II, Part B)
The product have been constructed to be incorporated in a machine or to be assembled with other machinery to construct a machine as set out in Directive 98/37/EEC
The manufacturer furthermore declares that it is not permitted to operate the products until the machine in which they will be incorporated
Conegliano, 01/06/2007
CE DECLARATION OF CONFORMITY
GEAR MOTOR DRIVE UNIT ZEN 60 and GEAR MOTOR DRIVE UNIT ZEN 100
Fig. 17
The Legal representative
Augusto Silvio Brunello
61