Included Items; Technical Information - Parkside PSBS 24 A1 Instrucciones De Utilización Y De Seguridad

12 Drill / hammer drill setting ring
13 Torque preselection ring
14 Fast battery charger
Red charge indicator LED
15
Green charge indicator LED
16
©

Included items

1 Carrying case
1 Rechargeable impact drill / driver with
rechargeable battery pack
1 Auxiliary handle
2 Bits
1 Charger
1 Operating instructions
©

Technical information

Cordless hammer drill PSBS 24 A1:
Rated voltage: 24 V
No-load speed: 1st gear: n
No-load speed: 2nd gear: n
Chuck capacity: 1.0 - 13 mm
Max. drill diameter: Metal: 13 mm
Wood: 30 mm
Masonry (concrete): 15 mm
Max. torque: 35 Nm
Dimensions: 324 x 68 x 237 mm
Ni-Cd rechargeable battery pack
PSBS 24 A1-1:
Rated voltage: 24 V
Capacity: 1.5 (Ah)
Capacity: 36 Wh
Fast battery charger PSBS 24 A1-2:
Rated voltage: 230 V ~ 50 Hz, 105 W
Charging current: 3000 mA
Charging duration: 90 min
Protection class:
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level:
Sound power level:
Sound pressure level
(Impact drilling in concrete): 87 dB(A)
Sound power level
(Impact drilling in concrete): 98 dB(A)
Uncertainty K:
).
Total vibration (vector sum of three directions) is
calculated in accordance with EN 60745:
Drilling in metal:
Screwing:
Impact drilling
in concrete:
-1
0 - 500 min
0
-1
0 - 1800 min
0
instructions has been measured in accordance with
a standardised measurement procedure specified
in EN 60745 and can be used to compare devices.
Different uses of the device give rise to different
vibration levels and in many cases they may exceed
the values given in these instructions. It is easy to
underestimate the vibration load if the electrical power
tool is used regularly in particular circumstances.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
76 dB(A)
87 dB(A)
3 dB
Wear ear protection!
Vibration emission value
a = 1.682 m / s
h, D
Uncertainty K = 1.5 m / s
Vibration emission value
a = 1.109 m / s
h
Uncertainty K = 1.5 m / s
Vibration emission value
a = 11.25 m / s
h, ID
Uncertainty K = 1.5 m / s
The vibration level given in these
Introduction
2 ,
2 ,
2 ,
2 ,
2
,
2
.
GB/MT 37