Tabla de contenido
SECTION 1 - RECESS MOUNTING
NOTE: The Semi-Recessed Mounting Kit (USMK27D6SR) allows you to semi-recess your cabinet, and supplies the semi-
recessed side kit. (Purchased separately)
These instructions are for recess mounting your cabinet into a 6" (153 mm) deep opening, or semi-recessed mounting your cabinet into
a 4" (102 mm) opening. Surface Mount instructions will come with the Surface Mount Kit - USMK27D6P
1. Make a rough opening and frame on all sides. Find the specific model dimensions in the diagram below to make the rough opening.
Determine if the cabinet is Electric or Non-Electric to proceed.
For cabinets with a lighted front mirror Robern recommends the Maestro® C•L® Dimmer from LUTRON®, Model # MACL-153M.
http://www.lutron.com/TechnicalDocumentLibrary/369613a.pdf
Other LED control dimmers may operate with this product but have not been tested or verified. It's recommended that the dimmer be
within reach of your mirror so you can adjust the brightness.
For on/off (no dimmer) operation a standard wall switch may be substituted in place of the dimmer.
6"
(153 mm)
1
Recessed Mount
4"
(102 mm)
Semi-Recessed Mount
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
24"
(610 mm)
Field wiring
Rough opening
UC2748 = 47"
UC2736 = 35"
UC2730 = 29"
UC2724 = 23"
4
18-5/8"
(473 mm)
(1194 mm)
(889 mm)
(737 mm)
(584 mm)
Part no. 209-1311-rB rev. 08/21/19
Uplift Tech Cabinet
Tabla de contenido
