NOTES
Unpack the mirror. Check the box thoroughly for all hardware and loose parts. Carefully inspect the mirror for damage. All wiring should
be done by a qualified licensed electrician.
WARNING:
CAUTION:
CAUTION:
grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
CAUTION:
other locations required by the National Electric Code.
CAUTION:
Accessories are available for the Uplift Cabinet. Please consult the accessory instruction guide for installation instructions.
DIMENSIONS
Uplift Tech
24"
(610 mm)
30"
(762 mm)
36"
(914 mm)
48"
(1219 mm)
27"
(686 mm)
Front View
Uplift Tech with Perimeter Lighting
30"
(762 mm)
36"
(914 mm)
48"
(1219 mm)
27"
(686 mm)
Front View
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
To reduce the risk of electrical shock, shut off power before wiring the cabinet.
Requires 120VAC 20Amp circuit.
This product must be connected to a grounded, metal permanent wiring system or an equipment-
The cabinet must be wired to a GFI (Ground Fault Interrupter) circuit when used in bathrooms and all
Maximum shelf load 26.5 LBS
1-1/4"
(32 mm)
Side View
Side View
3
7-1/8"
(181 mm)
7-1/8"
(181 mm)
Part no. 209-1311-rB rev. 08/21/19
Uplift Tech Cabinet