Configuring The Transmitter; Sound Processing - Worldcast Systems ECRESO FM 750W Guía Rápida

14. Configuring the transmitter

Click the button
'Easy Config' page.
Basic configuration can be managed on this single page:
• Power, frequency and RF on
• Input priority setting
• MPX configuration
• Input configuration
Default transmitter pre-accentuation is 50 µs. Depending on your country, you might need to switch it
to 75 µs (in the United States for instance). The Pre-accentuation parameter is available in the Input
Source section.
Once values have been changed, click the button

15. Sound processing

The Sound processing option is enabled for 30 days.
With an audio input, the default preset is '5B Natural'. To modify sound processing parameters, go to
the Transmitter/Modulation/Sound Process page.
To request a permanent license, contact your WorldCast Systems dealer.
16. SmartFM
Around 30 days of SmartFM credits have been added to the transmitter.
Go to the Transmitter/Main/SmartFM page to test the option and observe actual benefits.
To request additional credits, contact your WorldCast Systems dealer.
17. Getting on air
1. Disable the RF by clicking the "Set RF Off" button.
2. Make sure the RF indicator LED is off.
3. Disconnect the load and connect the antenna to the transmitter RF output.
4. Enable the RF again by clicking the "Set RF On" button.
Please read the user manual for more information on how your transmitter works.
in the tool bar to access the transmitter configuration and display the
to save the new settings.
English version
11