Network Configuration; Connecting To The Web Interface - Worldcast Systems ECRESO FM 750W Guía Rápida

English version
COM PACK OPTION: NETWORK CONFIGURATION
AND WEB INTERFACE

12. Network configuration

If the Communication Pack option is enabled, first set the IP address with the front panel:
9 8 . 0 0 M H z
9 8 . 0 0 M H z
-> N E T W O R K >
1 N E T W O R K -> A D R
-> 1 9 2 . 1 6 8 . 0 1 2 . 1 0 3
1 N E T W O R K -> M A S K
-> 2 5 5 . 2 5 5 . 2 5 5 . 0 0 0

13. Connecting to the web interface

Now the transmitter is set, connect it to the network.
 Though the web application is compatible with most browsers, performances vary from one browser to
another. For optimal performances, Google Chrome is recommended.

The browser may display a message indicating that the connection is not certified; however, the site is
secured (data is encrypted) and you may proceed to access it. To prevent these potential blocking and
warning messages, WorldCast Systems now supplies certificates for HTTPS browsing, see section 9.6.5 of
the manual for more information.
Open a web browser and enter in the address bar the
transmitter's IP address such as it was set above.
Select the language if necessary.
Enter the user name and password (default: Admin / admin)
and the screen name of your choice. It is used to
communicate with other connected users.
You can now access the web interface.
!
The transmitter must be in remote mode before parameters can be modified. Press the Local
button if needed.
10
From the main screen, press the "Enter" key to
0 W
display menus then the "+" key until you see the
Network menu.
1 0 0 W
Once you see this screen, press "Enter".
The IP address screen is displayed: press "Enter" to
switch to edit mode. Use the "+" and "–" keys to
adjust values and the "Enter" key to confirm.
Press the "+" key to display the Netmask and modify
it if needed. Press the "Enter" key to confirm.