After Finishing Work - Stihl KB Manual De Instrucciones

Before starting work,
inspect and clear the area
of stones, glass, pieces of
metal, rubbish or other
solid objects. Such
objects could be thrown
by the sweeping tool and directly or
indirectly strike the operator or
bystanders. Such objects may also
damage the sweeping tools.
Always operate the power tool in such a
way that the sweeping attachments
cannot become jammed or blocked.
To reduce the risk of injury, keep hands
and feet away from the moving
sweeping attachment.
If the sweeping attachment or deflector
becomes clogged or stuck, always turn
off the engine and make sure the
sweeping attachment has stopped
before cleaning. Dirt, grass, weeds, etc.
should be cleaned off the sweeping
attachment as necessary.
KB, KW
!
Warning!
During work, check the tightness and the
condition of the sweeping attachment at
regular intervals. If the behavior of the
sweeping attachment changes, stop the
engine immediately, and check the
attachment for cracks and damage.
Replace cracked or damaged sweeping
attachments immediately.
Do not mount any sweeping attachment
to a machine without proper installation
of all required parts. Never use
unauthorized parts to secure the
sweeping attachments. Failure to use
the proper parts may cause the
attachment or its component parts to
become detached and injure the
operator or bystanders.
!
Warning
The gearbox becomes hot during
operation. To reduce the risk of burn
injury, do not touch the gear housing
when it is hot.
English / USA

After Finishing Work

Always clean dust and dirt off the
machine – do not use any grease
solvents for this purpose.
9