Communication Setup - Promax RP-200 Manual Del Usario

Using Web Server application is possible to carry out the following functions
Send:
Configuration:
Reload:
In order to edit, place the cursor in the field to change and modify the value or skip.
Repeat this process with the next fields and finally select the Send function to transmit
all new data to the instrument. The equipment will update the control data using values
transmitted.
In the case of working in local mode, at any time is possible to update the control
data through Reload function. Thus, the last data transmitted to the instrument will
appear in the computer screen.

5.2 Communication Setup

This window shows the parameters related to the communication through the local
network. Access to each field to edit the following information:
- SNMP parameters: Simple network management protocol.
- Network parameters: Address IP, network mask.
- DHCP: Dynamic Host Configuration Protocol.
- Network Gateways.
By means of the lower screen buttons is possible to carry out the following
functions:
Main:
Send:
Calibration Values:
Page 16
Sends the new control data to the instrument.
Access to the communication setup parameters through the
local network.
Uploads the current instrument control data.
Backs to the main window (RP-200 control).
Stores the instrument configuration data.
(Only for use of the technical service).
USER'S MANUAL. RP-200
08/2006