Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL RP-200
2. SAFETY RULES
2.1 General safety rules
*
Use this equipment connected only to devices or systems with their common at
ground potential or insulated from the mains.
*
The AC adapter is a class I equipment, for safety reasons plug it to a supply line
with the corresponding ground terminal.
*
This equipment can be used in Over-voltage Category I installations and Pollution
Degree 2 environments.
*
The external DC charger can be used in Pollution Degree 1 environments and
only indoor.
*
When using some of the following accessories use only the specified ones to
ensure safety:
Power cord
Mains power adapter
Rechargeable battery
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions.
*
The user is only authorised to carry out the following maintenance operations:
Battery replacement.
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by qualified personnel.
*
The negative of measurement is at ground potential.
*
Do not obstruct the ventilation system.
*
Use for the signal inputs/outputs, especially when working with high levels,
appropriate low radiation cables
*
Follow the cleaning instructions described in the Maintenance paragraph.
08/2006
Page 3
Capítulos
Tabla de contenido
