Spares; Warranty; Technical Data - Rotwerk RB 18 vario Instrucciones De Uso

GB
Separate cardboard and plastics, and send
such packaging materials separately to an
official collection point.
Send used machines to an official collec-
tion point for electronic scrap.
S p a r e s
You can readily obtain the following
spares from the Rotwerk Service Centre
or through your authorised dealer.
20131 Vario drive belt (76)
20132 Drive belt (71)
20005 Mains power cable
20133 Vario drive, complete
20007 Top cover (75)
20008 Machine plate (12)
20009 Locking lever, complete (7+10)
20010 Plate holder (9)
20134 Drill chuck guard (129-134)
20012 Hinge pin (74)
20013 Front panel with switch (24-30)
20014 Handle bar, vario cpl. (51+52)
20135 Handle
(48+52)
20016 Restoring spring
20017 Plastic cam (2)
20018 Locking lever, lathe (7+10)
20136 Column (117)
W a r r a n t y
We provide a 24-month warranty on the
machine in line with legal and country-spe-
cific requirements.
Damage arising from natural wear and tear,
overloading or improper use is excluded
from warranty cover. Damage arising from
material failure or manufacturing defects
will be rectified free of charge by means
of replacement delivery or repair. For re-
pair under warranty the machine must be
returned to the authorised dealer in its ori-
ginal packaging, accompanied by proof of
GB-52
bar, tailstock, cpl.
purchase and warranty cover.
The drive belts are wearing parts, and are
excluded from warranty cover.
A precondition for meeting claims under
warranty is that the machine has been re-
gularly cleaned and greased.
Damage in transit resulting from inade-
quate packing is excluded from warranty
cover.
T e c h n i c a l d a t a
Rated voltage .............230 Volts ~ / 50 Hz
Power consumption ..........600 W/S6-40%
Drill chuck ........................... 16 mm (1-16)
Tool mount ................................ MK2, B16
Drilling capacity in steel ................. 18 mm
Speed
Range 1: ............................310 – 880 rpm
Range 2: .........................900 – 2,400 rpm
Torque
Range 1: .............................. 5.3 – 4.0 Nm
Range 2: .............................. 1.8 – 1.3 Nm
Gap .............................................. 120 mm
Drilling depth .................................. 50 mm
Column diameter ........................ 58,5 mm
Column height ............................. 600 mm
Overall height .............................. 750 mm
Weight ............................................. 29 kg
Protection class ........................................ I
Sound pressure ........................74.5 dB(A)
Article number ................................ 27000
Technical modifications and changes to the
appearance of the machine may be made
without notice in the course of ongoing
development. As a result, all dimensions,
information and data presented in these in-
structions are provided with no guarantee
of accuracy. Consequently, no legal claims
can be asserted arising from the informati-
on given in these instructions.
The noise is measured in accordance with
the requirements of EN 12717.