Festo EasyPort USB Manual De Instrucciones página 156

9. EasyPort USB command interpreter
156
156
Example
Values are recorded from a pneumatic pressure sensor. 10 V correspond
to 6 bar. Set the unit of measurement to bar, in order to be able to
monitor the measured values at the display in bar. Select a gain factor
of 6.
MU1.01=01
MG1.1=6.00
The unit of measurement bar is assigned to
input channel 0 at the EasyPort USB module
with address 1. The unit of measurement bar
appears on the LCD.
The measured value with the unit of
measurement bar which is displayed on the
LCD of EasyPort USB module 1 is multiplied
by a factor of 6.00.
© Festo Didactic GmbH & Co. KG „ 721876