Step 1, Remove Packaging - GE Profile PSB42LGRWV Instrucciones De Instalación

1 REMOVE PACKAGING
CAUTION:
Top-Heavy – be careful when moving. When using an
appliance dolly, handle from Freezer side only.
• Carefully cut banding at the top and bottom, remove
outer carton.
• Slide out rear corner posts (2).
• Slide carton off top of cabinet.
NOTE: DO NOT LAY CABINET DOWN IN ORDER TO
REMOVE SKID!
• The unit is secured to the skid with six 7/16" bolts
and six 1/2" nuts.
• Remove all six 7/16" bolts that secure metal
brackets to the refrigerator.
• Remove the three 1/2" nuts and washers from the
Freezer side.
• Remove nut from rear wood block on freezer side.
• Tilt unit up on Freezer side toward Fresh Food side.
• Push bolts down, remove metal bracket from
Freezer side. Remove wood block from freezer side.
• Slide the appliance dolly underneath the Freezer
side.
• Using corner posts (2 on front corners) to prevent
damage, secure unit to appliance dolly.
NOTE: If corner posts are too long, cut the posts to a
shorter length
Installation Instructions
Refrigerator is
Toekick Taped to
Top of Unit
Metal
Bracket
1/2" Nuts
• Lift the unit off the skid with the appliance dolly.
• Remove toekick taped to the top of the unit.
• Set toekick aside for final installation.
CAUTION:
ROLL OR DRAG UNTIL UNIT IS OFF SKID.
CAUTION:
WATER LINE IS CLEAR OF APPLIANCE DOLLY TO
AVOID DAMAGE.
13
Bolts
DO NOT ATTEMPT TO
MAKE SURE THE